How to Perform the Orbi AX6000 Setup Easily?
The Orbi Pro WiFi 6 routers are designed to deliver high-speed internet and seamless connectivity within your premises. However, these devices are packed with ultimate performance and cover around 350 meters square with their whole mesh wi-fi systems and satellite. If you own an AX6000 Orbi router, then the Orbi AX6000 Setup is a must to make it work for you.
Moreover, setting up a new wifi router is essential to keep all the connections secure and strong in every room all the time. Therefore, this guide elaborates on the complete step-by-step procedure of the Netgear Orbi AX6000 Setup in a simplified manner. Moreover, you will dive deep into this networking device’s basic and advanced settings. So, let’s have a closer look at this guide!
How To Perform the Orbi AX6000 Setup in Multiple Ways?
To begin with, the Orbi AX6000 WiFi 6 Router Setup process must have a stable internet connection, accurate web/IP address, valid admin details, etc. Further, you must find an appropriate method to accomplish this process easily.
Generally, there are three different ways to set up the Orbi AX6000 router, including using the web GUI, the Orbi app, and the WPS button. So, don’t worry if you are unaware of these methods. Hereon, we highlight the deeper insights of each method one by one, as given below:
Netgear Orbi AX6000 Setup Via Web Browser
- Initially, plug in the Orbi AX6000 router is plugged into a wall socket.
- Then, connect your computer to the available 2.4 GHz wifi network.
- Now, open any web browser and type the orbilogin.net web address on the search bar.
- Instead, you can use the orbilogin.com and 192.168.1.1 IP address.
- Further, enter your valid admin details on the login page and hit ‘login’.
- After login, you reach the home dashboard of the Orbi.
- Hereon, go to Advanced>Advanced Setup>Wireless Settings and tap on ‘Router Mode’.
- Then, tap on Wireless Setup and the Wireless Settings page opens.
- Now, edit the SSID and password as per your preferences and tap on ‘Apply’.
- Further, visit the Internet Settings, Wireless Setup, WAN Setup, LAN Setup, Advanced Setup, etc. sections to configure further settings.
- Hereon, you can configure Parental Controls, Guest Access, Port Forwarding, etc. settings.
- Finally, save and apply all the changes to complete this setup process.
Orbi AX6000 Setup Via the Orbi App
- Primarily, confirm that you have the latest version of the Orbi app on your smartphone.
- If you don’t have an existing app, then download it from the AppStore or PlayStore.
- Now, connect your smartphone to the available home wifi network.
- Further, launch the app and log in to the Orbi router.
- After login, you reach the smart setup wizard of the Orbi AX6000 router.
- Hereon, navigate to the Menu and tap ‘WiFi Settings’ to change the SSID and password.
- Now, set a new network name and password under the WPA2-PSK security mode.
- Further, visit the Parental Controls, Guest WiFi, etc. sections to configure your router as per your preferences.
- Finally, the Netgear Orbi AX6000 Setup process ends here.
Using the WPS Button Method For Orbi AX6000 Configuration
- To begin with, make sure your Orbi router is receiving an adequate power supply.
- Then, locate the Sync button on the Orbi router.
- Now, press the Sync button on the router, and within 2 minutes press and hold this button on the Orbi satellite.
- Wait for a few seconds and release the button when the satellite properly syncs with the router.
- At last, the Orbi AX6000 Configuration via the WPS button method finishes.
What is the Best Way For the Netgear Orbi AX6000 Firmware Update?
Moreover, you can perform the Netgear Orbi firmware update in two ways, manually or automatically. Further, you can either opt for the Orbi app or the web interface to proceed with the Netgear Orbi AX6000 Firmware Update. So, below are the detailed steps for the same using the manual method:
- Firstly, download the latest firmware file and save it to a specific location on your computer.
- Then, log into the Orbi router dashboard via the web GUI.
- Now, you reach the basic home page of the Orbi AX6000 router.
- Hereon, navigate to Advanced>Administration>Firmware Update>Online/Manual Update.
- Then, the firmware update page appears to you.
- Now, check the box beside your satellite’s model number.
- Tap on the ‘Update’ button and the window opens.
- Hereon, enter the admin password and tap on ‘Browse’ to select the downloaded firmware file.
- After that, select the firmware file from your computer and hit the ‘Upload’ button.
- Wait for a few minutes to complete this process.
- After the update finishes, select ‘Status’ and check the current firmware version on this page.
- Finally, your Orbi AX6000 firmware update is completed.
In essence, you have gone through the Orbi AX6000 Setup guide. If you have any queries, drop us a line in the chat section!
FAQs
If the Orbi satellite is not syncing with the Orbi router, then make sure your router and satellite are powered on. Restart your networking device, check the power sources, and ethernet cable connections, and make sure the power adapter is working properly.
The indication of a pulsing white LED on the Orbi router represents that your Orbi satellite is booting up.
You can easily set up the parental controls on your Orbi AX6000 router via the Orbi app. For that, access the app dashboard, navigate to the Parental Controls, and follow the on-screen instructions.
If the Orbi app is not working properly, then clear the app cache, and unwanted temporary files, and check its compatibility with your smartphone. If it still doesn’t work, then reinstall the app on your smartphone.
To reset the Orbi AX6000 router, locate, press, and hold the reset button on the Orbi router for around 7 seconds using a small pin. Then, release this button and the router starts reverting to its factory settings.
