A Detailed Guide On the Orbi SRR60 Setup Process!

In the digital world, Netgear Orbi has established a hallmark with its wide-ranging networking devices. Orbi routers and satellites come in different models to facilitate seamless network connectivity at relevant high speeds, facilitated via wifi 6 technologies. When you buy any Orbi router, the Orbi SRR60 Setup is the first step you need to perform to enjoy its key features.

Likewise, this guide highlights all-in-one details regarding the Netgear Orbi SRR60 Setup to make the users familiar with this process. Additionally, this guide teaches you the different ways to carry out this process in a simplified way. For more relevant insights, stay on this page!

A Detailed Guide On the Orbi SRR60 Setup Process!

Meanwhile, when you move towards setting up your Orbi wireless router, you must have a stable internet connection, accurate admin details, an Orbi app, etc. Further, you must know the different ways to perform the Orbi SRR60 AC3000 Setup easily. Therefore, this section discusses the stepwise procedures of Orbi setup one by one. So, let’s read further!

Netgear Orbi SRR60 Setup Via Web Browser

To begin with, connect your Orbi Pro router to the power source.
Wait for the Orbi router’s ring light to turn white.
Now, connect your computer to the Orbi’s wifi network.
You can also use the ethernet cables for a wired connection.
Then, launch a web browser on your computer and type the orbilogin.net or orbilogin.com web address.
Instead, you can use the 192.168.1.1 default gateway address.
Now, enter the required details in the login window.
After that, you reach the smart setup wizard of the Orbi router.
Further, visit the Advanced>Advanced Setup>Router/AP Mode and choose ‘Router’ mode.
Hereon, go to Wireless and the Wireless Settings page opens.
Now, edit the current SSID and password of your Orbi Pro router and tap Apply.
Moreover, tap on Add Orbi Satellite to add more satellites to your network.
Now, navigate to the Internet Settings, set Parental Controls, Guest Portal, Access Control, etc. tabs to configure your device accordingly.
Finally, save and apply all the settings to finish the setup.

Using the WPS Button Method For Orbi SRR60 Configuration

Initially, plug in the Orbi router to the power source.
Then, locate the Sync button on the back side of the Orbi satellite.
Now, press this button on the satellite and within 2 minutes, prowess the Sync button on the Orbi router.
Hold this button for a few seconds and wait till the Orbi satellite’s ring light turns blue.
Now, release this button, and your satellite is connected to the Orbi SRR60 router.

Orbi SRR60 AC3000 Setup Via the Orbi App

Primarily, download the NETGEAR Orbi app on your smartphone.
Then, connect your smartphone with the available wifi network.
Now, open the Orbi app and access your admin account using valid details.
Further, you reach the smart setup wizard of the router.
Hereon, navigate to the WiFi Settings to edit the network name and password.
Now, set a new SSID and password in the WPA2-PSK security option to secure your network.
After that, visit the other settings such as Parental Controls, Guest WiFi, Security, etc. sections to configure your device accordingly.
Then, save all the settings once you are done.
With this, the Orbi SRR60 Setup process is completed.

What Are the Essential Steps For the Orbi SRR60 Firmware Update?

Certainly, to ensure the optimal performance of your Netgear Orbi router, it is essential to have the latest firmware file on your device. In addition, the Orbi SRR60 Firmware Update helps resolve the key complexities and connectivity issues associated with your device. Moreover, you can automatically update the Orbi firmware via the web browser, as explained below:

Firstly, download the latest firmware file from the website and save it on your computer.
Now, launch the web browser and log in using Orbilogin.net or orbilogin.com.
Then, the Basic home page of the Orbi SRR60 displays.
Now, navigate to the Advanced>Administration>Firmware Update sections.
Hereon, a firmware update page appears.
After that, tap on the ‘Check’ button to see the available firmware updates and its current version.
If there is any update available, then tap the ‘Update All’ button.
Then, the router automatically locates the previously saved firmware file on your device.
Now, the Orbi router and satellite begin the firmware update.
After around one minute when the update is completed, the Orbi restarts.
At last, the Orbi SRR60 firmware upgrade finishes.

To sum up, the Orbi SRR60 Setup process is simplified through this guide. If you seek any human assistance in this process, talk to our experts!

FAQs

What is the default username and password for the Orbi SRR60?

The default username for the Orbi SRR60 is ‘admin’ and the password is ‘password’, both in lowercase.

Why do my Orbi router and satellite show a solid blue LED?

The indication of a solid blue LED on the Orbi router and satellite shows a good connection between the two.

Which Satellite is Compatible With the Orbi SRR60 WiFi Router?

The Orbi SRR60 satellite is compatible with the SRS60, SRC60, and RBS50Y satellites.

How to restart your Orbi SRR60 router?

To cold restart, the Orbi SRR60 router, firstly, plug out the power cord from the router and wall sockets. Then, wait for around 30 seconds and plug the devices back into the power supply. This will completely restart your device.

Netgear Orbi SRR60 Setup & Login

To set up the Netgear Orbi SRR60 router, you would need the web address and login credentials of the device. The default web domain is orbilogin.net and orbilogin.com to access the Orbi router login page. The username is ‘admin’ and the password is ‘password’ for Orbi SRR60 router setup. If you don’t have a user manual or you simply don’t want to read the whole manual to set up your Orbi router then you can use this quick guide. Learn how to setup Orbi SRR60 router in the easiest way possible. Things you need to set things up:

How to setup Orbi SRR60 router?

Follow the below-given instructions for Netgear Orbi SRR60 setup & login-

Hardware connection

Unplug your modem, remove its batteries, and replace it with new batteries; plug it back into the power source.
Take an Ethernet cable to connect the yellow port on the Orbi router to your modem.
Connect the power cable to the Orbi router and then attach the power adapter. Connect it to the power source.
The power LED of the Orbi router will turn green. If not, press the power button.

Web-browser setup

Connect your computer to the default wifi network of the Orbi SRR60 router. You can find the default SSID and passkey printed on the router’s label.
Get on to an internet browser and type the domain orbilogin.net or orbilogin.com onto its address bar.
When the Orbi login window appears, fill in Orbi default username and password if you’re signing in for the first time.
Using Orbi setup wizard, you can configure the security and wireless settings of your router like- changing the SSID and password.
Change the default login credentials of the Orbi SRR60 router to prevent unwanted access into your Orbi network.
Make the required changes and press the ‘Save’ button to apply the changes.

Netgear Orbi app setup

Set up Netgear Orbi SRR60 router using the Netgear Insight Orbi app. Download the app on your mobile phone.
Connect the mobile phone to the Orbi network by going to the ‘Wi-Fi’ settings and clicking on the Orbi wifi network using its wifi password.
Open the app and click on the ‘New Orbi router setup’ option. Scan the QR code of the router using your phone’s camera.
The Orbi app will instruct you on the steps for the Orbi SRR60 router setup.

A Detailed Guide On the Orbi SRR60 Setup Process!